Chrysler Individual Fastener Kits

AMK kits include the attaching fasteners for both sides

* Green rows indicate inclusion in a Master Kit

Part #	Subject	Notes	Pcs	Price
C-8078	AIR CLEANER - WING NUT ONLY (1)	NUT	1	$3
C-8079	AIR CLEANER - WING NUT ONLY (2)	NUTS	2	$6
C-8080	CARB LEVER STUD - All V8	SPECIAL CONI KEPS	1	$12
C-8081	CARB LEVER STUD - All V8	SPECIAL TALL FLNG NUT	1	$7
C-8052	CARBURETOR - 4V	STUDS, NUTS	8	$9.50
C-8055	CARBURETOR - 4V	1 1/8" HX BOLTS "H"	4	$16
C-8057	CARBURETOR - 4V w 1/8" GASKET	1.31" HX BOLTS "TR"	4	$6
C-8070	CARBURETOR AIR HEATER - 383/440	HXWA SCREW, STUDS, CONI KEPS	5	$8.50
C-8067	CARBURETOR CHOKE - 318/340/383/440-4V	IND HX SCREWS	2	$4
C-8093	CARBURETOR CHOKE - 318/340/383/440-4V	HX CONI SEMS	1	$2
C-8068	CARBURETOR CHOKE - 63-67 & SIX PACK	HX CONI SEMS	2	$4
C-8075	CARBURETOR SOLENOID - 440 SIX PACK	HX CONI SEMS	2	$2
C-8056	CARBURETORS - 340/440 SIX PACK	1 1/8" HX BOLTS "H"	12	$48
C-8204	CRANKSHAFT DAMPER - 383/440	HX BOLT, FLAT WA	2	$12
C-8041	CRANKSHAFT PULLEY - 8 CYL	HX CONI SEMS	6	$8
C-8046	DISTRIBUTOR - 383/440/426 HEMI	HX BOLT "H", CONICAL WA	2	$6
C-8186	ENGINE FAN - .70 SPACER	1.62 HX BOLTS "H", CONI WA'S	8	$12
C-8184	ENGINE FAN - 1.24 SPACER	2.25 HX BOLTS, CONI WA'S	8	$12
C-8182	ENGINE FAN - 1.40 SPACER	2.38 HX BOLTS, CONI WA'S	8	$16
C-8183	ENGINE FAN - 1.60 SPACER	2.62 HX BOLTS, CONI WA'S	8	$16
C-8188	ENGINE FAN - 1.72 SPACER	2.75 HX BOLTS, CONI WA'S	8	$12
C-8181	ENGINE FAN - 2.20 SPACER	3.25 HX BOLTS, CONI WA'S	8	$12
C-8136	ENGINE FAN > CLUTCH	HX NUTS, CONI WA'S	8	$5.50
C-8137	ENGINE FAN CLUTCH > WATER PUMP	PLACE BOLTS	4	$8
C-8063	EXHAUST MANIFOLDS - 383/440	STUDS, 3 SHORT & 2 L SLEEVE NUTS	24	$72
C-8065	EXHAUST MANIFOLDS - 383/440	STUDS, 1 SHORT & 2 L SLEEVE NUTS	24	$55
C-8217	FLYWHEEL - 383/440 w M/T	15/16 L PLACE BOLTS	6	$18
C-8042	FUEL PUMP - 8 CYL	HX FLANGE BOLTS w PELLET	2	$6
C-8048	INTAKE MANIFOLD - 383/440	GR-8 HX BOLTS "TR"	8	$40
C-8072	INTAKE MANIFOLD - 440 SIX PACK	HX BOLTS "TR", HX CONI SEMS	13	$43
C-8037	OIL PAN - 383/440/426 HEMI	HX CONI SEMS "23"	20	$31
C-8039	OIL PUMP (factory) - 383/440/426 HEMI	HX BOLTS, SPLIT WA'S	10	$17
C-8169	OIL PUMP (replacement) - 383/440/426 HEMI	HX BOLTS, SPLIT WA'S	10	$14
C-8071	THROTTLE CABLE BRACKET - ALL SIX PACK	HX CONI SEMS "ANCHOR"	2	$2
C-8173	THROTTLE CABLE RETAINER @ CARB	.75 D CONI KEPS	1	$2
C-8061	TIMING COVER - 383/440/426 HEMI	HX CONI SEMS	8	$12
C-8033	VALVE COVERS - 383/440	HX CONI SEMS, STUDS, CONI KEPS	16	$24
C-8044	WATER NECK - 8 CYL	HX BOLTS "H"	2	$6
C-8050	WATER PUMP - 383/440/426 HEMI	HX BOLTS "A", "F", "H", "O", "RSC", "UF"	4	$10
C-8051	WATER PUMP HOUSING - 383/440/426 HEMI	HEX BOLTS "L5", "H", "A", CONI WA	8	$30

Chrysler Fastener Kits

AMK Products offers fastener for your classic Mopar … Chrysler, Dodge and Plymouth individual fastener kits also known as “I-KITS” for the restoration of popular 1964 – 1974 Chrysler models. These include Barracuda, Belvedere, GTX, Challenger, Charger, Coronet, Super Bee, Dart, Demon, Satellite, Road Runner, Valiant and Duster.

AMK’s extremely detailed I-KITS are based on the part numbers specified in the factory assembly manuals and field work. Factory assembly manuals are highly recommended and available from many sources such as MMC Detroit. Helping to ensure accuracy of our Chrysler fastener kits is AMK’s fastener library which contains the original Chrysler specifications for thousands of Chrysler part numbers.

Applications for AMK I-KITS cover many areas of the vehicle including air conditioning, body, brakes, cooling, differential, electrical, engines 273, 318, 340, 360, 383, 440, engine mounting, exhaust, fuel, heat, interior, mouldings, steering, suspension, transmission and wipers.

I-KIT labels include useful information such as the assembly manual page which will illustrate where and how the fasteners are used. This information will save considerable time by keeping the assembly process organized and efficient. The I-KIT label also includes the group number for use with parts books, the Chrysler models that use the kit and the percentage of USA made fastener content.

Chrysler cars are American made. We respect that at AMK and pledge to produce a minimum of 80% of the fasteners used to make our Chrysler fastener kits right here in America, currently we are exceeding 82% USA made content. AMK is unusually involved in the manufacturing process, we supply highly detailed specifications, heading tools and SEMS washers to our manufacturers.

We are also “nuts” about finishes. AMK goes to great effort to deliver correct, high-quality finishes. Chrysler used many finishes including phosphate and oil, phosphate and red dye, electrolytic zinc, mechanical zinc, zinc & yellow, zinc & black, cadmium, chromium, copper flash and many colors of dip spin enamel. Also, some fasteners were “locked” with a nylon strip, pellet or patch. Others were sealed with bi-wax sealer or mastic sealer. AMK understands finishes and knows which shops do the best work.

Thanks for your interest in AMK’s Chrysler fastener kits and Long Live our Classic Cars!